DIY Set for CAN'BRICK (Exterior Only)
DIY Set for CAN'BRICK (Exterior Only)
An exterior version of the DIY Set for CAN'BRICK is now available. Adhesive and jointing mortar come pre-portioned in a single set, ideal for tile craft and DIY over small areas. It covers about 1.4m² of exterior wall with CAN'BRICK, the brick tile that faithfully recreates antique brick. Joint colors are available in the popular MT-MEJI shades: Cream, Off-White, Yellow, Light Brown, and Gray.
Recommended Joint Width and Estimated Usage
Ancillary Materials
Combine the set with any brick you like from the wide range of CAN'BRICK designs (11 series, 36 colors, sold separately). It comes with a DIY installation manual that explains how to set out and lay brick tile, so beginners can work with confidence. The Exterior DIY Set for CAN'BRICK transforms the look of your exterior. Start from 1.4 m² — an accent around the entrance such as a gate post, or a garden planter — and take on a self-renovation of an exterior wall.
CDIY-I
DIY Set for CAN'BRICK (Exterior Only)
- Joint Color
- Joint Finish
- Joint Pattern
Set contents and price
MT-BOND-FLEX adhesive for exterior walls (2.0kg) ×2 pcs
MT-MEJI jointing mortar for single-pass joint finishing (net2kg) ×4 bags
DIY installation manual
Gloves
* Optional, sold separately: Jointing Mortar Bag / Notched Trowel (7mm)
MT-MEJI joint colors (all 5 colors)
MT-MEJI Cream | MT-MEJI Off-White | MT-MEJI Yellow | MT-MEJI Light Brown | MT-MEJI Gray |
 |  |  |  |  |
A stylish new look with the DIY Set for CAN’BRICK
See the included installation manual for details on how to lay the tile
Suitable substrates
Siding, concrete, block, lath mortar
* Clean the substrate and check that it is firmly fixed and that there are no steps at board joints and similar before you install.
* Note that it cannot be used on non-absorbent substrates such as painted surfaces.
Precaution
Important Notes
・The CAN'BRICK brick tile is sold separately.
・Product appearance, specifications, and prices may change without notice as we improve our products.
・Always wear safety glasses, a mask, and rubber gloves while working.
If it gets in your eyes: rinse immediately with running water and see a doctor.
・If it contacts your skin: wash it off with water. See a doctor if any abnormality appears.
・If swallowed: see a doctor immediately.
・Store away from moisture and direct sunlight, out of the reach of small children.
・Store and work at 5–35℃. Low or high temperatures can cause incomplete curing.
・Do not mix with other materials.
・Use within 1 month of purchase.
・Do not pour leftover MT-BOND-FLEX or MT-MEJI into rivers or drains; dispose of them in accordance with the law.
Other items
Sub Materials
DIY Set for CAN'BRICK (Interior Only)
Jointing Mortar for Interior and Exterior Use
MT-MEJI
Jointing Mortar Bag
Grout Bag
Notched Trowel 7mm
Kushime kote
Jointer for Grapevine Joint Finishing
Grapevine Jointer
Flexible adhesive for interior and exterior tile
MT-BOND-FLEX
Adhesive for Interior and Exterior Manufactured Stone Veneer Wall Tile
ME-05
Adhesive for brick tile, interior use
MT-BOND
Repel S (penetrating water repellent)
REPEL・S
Glisten Coat (resin wax for interior use)
GLISTEN COAT
BRICK+AID (CAN’BRICK repair kit)
BRICK+AID
Stone Aid (CAN’STONE repair kit)
STONE+AID
Stone Concealer (touch-up compound for CAN'STONE manufactured stone veneer)
STONE Concealer
Sasara (joint finishing brush)
Sasara
Brick Chain Fall Prevention Bracket
Brick Chain
CONTACT
General Inquiries