Resin Wax　Glisten Coat (resin wax for interior use)（GLISTEN COAT）

Features of Glisten Coat

• A highly durable resin wax for interior walls and floors.

• Additional coats let you tune the finish anywhere from matte to a subdued sheen.

• It lets the material breathe while keeping dirt from soaking in and stopping surface powdering.

• It also stands up well to rainwater tracked into entryways and similar areas.

Suitable substrates

Brick, precast concrete products, natural stone (unpolished), jointing mortar, and concrete

*Cannot be used in areas that are constantly wet, such as bathrooms. *Test the product on an inconspicuous area before use.

Before-After

On the Perrancho (PER) floor tile

Spec, Price

Specifications and price

Standard coverage varies with the substrate. Packaging is also subject to change without notice.

Glisten Coat (4L)	Glisten Coat (2L)	Glisten Coat (1L)
[Walls] Standard coverage: approx. 60m² per 4L can [Floors] Standard coverage: approx. 20m² per 4L can (two coats)	[Walls] Standard coverage: approx. 30m² per 2L can [Floors] Standard coverage: approx. 10m² per 2L can (two coats)	[Walls] Standard coverage: approx. 15m² per 1L can [Floors] Standard coverage: approx. 5m² per 1L can (two coats)

How to use

◾️Applying to walls

Brush the wall down and remove all dust. Once you have confirmed that the surface is completely dry, apply the wax evenly with a brush over small areas or a roller over large areas, leaving no gaps. Let it dry for about 30 minutes, check how much powdering remains, and add another coat wherever the effect is weak. *Apply additional coats to build up shine. *Before recoating, let the surface dry completely, until it is no longer tacky.

◾️Applying to floors

Clean the floor thoroughly. Once you have confirmed that it is completely dry, apply the wax evenly with a brush over small areas or a wax mop over large areas, leaving no gaps. Use 2 to 4 coats as a guide and adjust to the level of shine you want. *Before recoating, let the surface dry completely, until it is no longer tacky. *As a guide, maintain floors every 1 to 3 months: remove dirt from the affected areas with a neutral detergent, then recoat following the steps above.

◾️Drying the coated surface

Let the coated surface (floor or wall) dry. Protect it from water and similar exposure for 12 hours after application.