Name: canbrick G.G.Brooklyn
Brand: CAN'ENTERPRISES
SKU: G.G.Brooklyn
Price: 720 JPY
Availability: InStock

CAN'BRICK

“G.G. Brooklyn (GGB)” is made by slicing selected bricks from Glen-Gery, one of the largest premium brick manufacturers in the United States. Brooklyn, New York is one of the oldest districts in America and at the same time a place where the newest fashion, art and culture come together. The uneven sizing that comes of making each brick by hand gives the wall a look all its own, and with it the restless energy of Brooklyn.

GGB-A1

G.G.Brooklyn Slice GGB-A1 Flat (25mm thick)

Joint Color: Light Brown
Joint Finish: Full Joint
Joint Pattern: Running Bond

Item

Dimensions(mm)

Thickness

Quantity/case

Quantity per Box(㎡ or m)

Required Quantity(㎡ or m)

Weight/case

List Price

Flat

GGB-A1-F

65~75×211~221mm

22~25mm

22 pcs

0.4㎡

55 pcs/m²

17.2kg

¥26,500/m² ¥10,600/bundle

Corner

GGB-A1-C

65~75×(97~107, 211~221)mm

22~25mm

13 pcs

1ｍ

13 pcs/m

15.2kg

¥13,900/m ¥1,070/pc

Onama

GGB1-O

65~75×97~107×211~221mm

3 pcs

—

8.7kg

¥720 ¥720/pc

Yo-kan

GGB1-Y

65~75x211~221mm

42〜52mm

1 pc

0.01㎡

72 pcs/m²

1.7kg

¥250 ¥250/pc

Our works

Case Studies

レンガタイル『ジージーブルックリン (G.G.B)』を張ったリビングの内壁の施工例

レンガタイル『ジージーブルックリン (G.G.B)』を張ったオフィスの内壁の施工例

レンガタイル『ジージーブルックリン (G.G.B)』を張ったジージーブルックリンの内壁の施工例

⚫︎The G.G.Brooklyn series comes in 3 types: sliced brick, full brick and bar type. Choose the one that suits your application.

Slice (sliced brick)

Imported sliced brick G.G.Brooklyn (GGB)

Onama (full brick)

Yo-Kan (bar type)

Calculator

Material Estimator (Quantity, Jointing Mortar, Adhesive)

Enter the installation area (m²) and choose a bond pattern, and the tool calculates the number of cases of flat and half pieces you need (with item numbers), along with estimated quantities of MT-MEJI jointing mortar and MT-BOND / MT-BOND-FLEX adhesive.

Select Color

Installation Area（㎡）㎡ Bond Pattern

* Rough estimates based on a 10mm joint width. Actual usage varies with installation conditions.

Full version covering corners, lintels, joint width, and weight

Precaution

Important Notes

・This is an imported product, so please be sure to check stock availability before placing an order. ・Allow a joint width of approximately 12mm.

・The quantities required per m² and per m include the joints.

・These are handmade imported bricks, so some pieces vary in size and weight by more than the stated figures.

・Every brick has a face of its own, so please allow for variation in color, pattern and size when you specify it.

・Some pieces may crack. Please fit the broken faces back together as you install them.

FAQ

Q1. Can CAN’BRICK be used on exterior walls?

Yes, it can be used on exterior walls.

To keep it looking its best, we recommend using it together with our ancillary material “Repel S” (penetrating water repellent).

Q2. Is CAN’BRICK an imported product?

No. It is made in Japan.

Every piece is made by hand by our craftsmen at our own factory in Japan, so we can supply matching material if repairs are needed in the future.

Q3. I have heard that brick tile made as a precast concrete product, such as CAN’BRICK, is weaker than porcelain tile. Is that true?

It is true that the strength is lower than porcelain tile. In recent years, however, installation with flexible adhesive has become standard practice, which compensates for this in most cases, and cracking has decreased significantly.

Even in the unlikely event that a crack appears, our “BRICK+AID” repair compound makes it easy to fix, so you can specify it with confidence.

Q4. CAN’BRICK is a cement-based product — is the cut edge cement gray?

No. Pigment is mixed into the mortar, so the cut face is the same color as the surface.

When a piece has to be cut on site, we recommend scoring a line and splitting it with a chisel and hammer. If the cut face still bothers you, we recommend “BRICK+AID,” a repair compound made specifically for brick tile.

Q5. Is there a risk that the product will be discontinued?

No. Even if an item is discontinued for our own reasons, we can put it back into production at our own factory.

You can specify it with confidence, knowing material will still be available if repairs become necessary.

Q6. Is CAN'BRICK non-combustible? Please tell us the certification number.

CAN'BRICK is a non-combustible material.

The Building Standards Act recognizes two kinds of non-combustible materials:

“Specified” materials: non-combustible materials specified by the Minister of Land, Infrastructure, Transport and Tourism
“Certified” materials: non-combustible materials that have received individual certification from the Minister

The mortar and concrete CAN'BRICK is made from are classified as “specified” non-combustible materials. The certification number we are often asked about is issued only for “certified” materials.

Both count as non-combustible materials under the Building Standards Act and can be used in the same way.