MT-BOND-FLEX

Adhesive for Brick Tile　Flexible adhesive for interior and exterior tile（MT-BOND-FLEX）

MT-BOND-FLEX is a one-part reactive adhesive based on modified silicone and epoxy resin, developed for installing interior and exterior tile. Once cured it stays rubber-like and flexible, so it relieves the stress caused by substrate movement and thermal expansion.

Recommended Joint Width and Estimated Usage

Joint Width'-

Ancillary Materials

MTBF-DGR

MT-BOND-FLEX Dark Gray 2kg

Joint Color
Joint Finish
Joint Pattern

Dark Gray

MTBF-DGR

9 pcs

¥3,050/pc ¥3,050/pc

Color

White

Gray

Dark-Gray

Capacity: 2kg per unit
Standard coverage (board substrate): approx. 0.6〜0.8m² per unit
Where to use: interior and exterior walls
Interior substrates: mortar, and boards such as calcium silicate board
Exterior substrates: concrete, mortar, and boards such as siding board
Suitable tile: 300 sq. and smaller, 2kg or less per piece (interior use is limited to glazed tile)
Open time: within 90 minutes at 5℃　within 60 minutes at 23℃　within 30 minutes at 35℃
Colors: White, Dark Gray, Gray
Main components: modified silicone and epoxy resin
Design price : ¥2,650 per unit