Name: canstone Outlet
Brand: CAN'ENTERPRISES
SKU: Outlet
Price: 4860 JPY
Availability: InStock

CAN'STONE

Outlet stock of stacked stone look manufactured stone veneer and wall material that reproduces the character of natural stone, for interior and exterior use. As outlet stock, quantities are limited. Please contact us for current availability and pricing.

AM-OUT

CAN'BRICK Amsterdam AM-outlet Flat

Joint Color
Joint Finish
Joint Pattern

Item

Dimensions(mm)

Thickness

Quantity/case

Quantity per Box(㎡ or m)

Required Quantity(㎡ or m)

Weight/case

List Price

Flat

CFP-AM-OUT

W: 170~182×H: 47~52mm

17~20mm

87 pcs

1㎡

87 pcs/m²

21kg

¥7,300/m² ¥7,300/m²

Corner

CCP-AM-OUT

W:82~87, 170~182×H:47~52mm

17~20mm

42 pcs

2.47ｍ

17 pcs/m

15kg

¥5,000/m ¥294/pc

Calculator

Material Estimator (Quantity, Jointing Mortar, Adhesive)

Enter the installation area (m²) and choose a bond pattern, and the tool calculates the number of cases of flat and half pieces you need (with item numbers), along with estimated quantities of MT-MEJI jointing mortar and MT-BOND / MT-BOND-FLEX adhesive.

Select Color

Installation Area（㎡）㎡ Bond Pattern

* Rough estimates based on a 10mm joint width. Actual usage varies with installation conditions.

Full version covering corners, lintels, joint width, and weight

Precaution

Important Notes

•Colors may differ from the photographs. To confirm color, request a physical sample or contact our sales department.

• “CAN'STONE” is not a fired ceramic product.

• “CAN'STONE” is an interior and exterior wall material designed after natural stone.

・Color varies from piece to piece, which is part of the character of natural stone. Always take pieces from several cartons as you install.

・ The products above are available in two shapes: flat pieces and corner pieces.

• CAN'STONE can be produced in custom order colors. We can work to any quantity, so please talk to us about what you need.

・About precast concrete products

FAQ

Q1. Can CAN’STONE be used on exterior walls?

Yes, it can.

To keep it looking its best, we recommend using it together with our ancillary material “REPEL S” (penetrating water repellent).

Q2. Is CAN’STONE an imported product?

No. It is made in Japan.

Every piece is made by hand by our craftsmen at our in-house factory in Japan, so we can still supply matching material if repairs are needed years later.

Q3. I have heard that precast concrete stone tile is weaker than porcelain tile. Is that the case?

It is true that it is not as strong as porcelain tile. In recent years, however, installation with flexible adhesive has become standard practice, which largely compensates for this and has greatly reduced cracking.

And in the unlikely event that a crack does appear, our “STONE+AID” repair compound makes it easy to fix.

Q4. Since CAN’STONE is a cement product, is the cut edge cement gray?

No. Pigment is mixed into the mortar, so the cut edge is the same color as the face.

When cutting on site, we recommend scoring a line and splitting the piece with a chisel and hammer.

Q5. Is there a risk of the product being discontinued?

No. Even if we do discontinue a product for our own reasons, we can produce it again at our own factory.

You can specify it with confidence, knowing that material will be available if repairs are needed.

Q6. Is CAN'STONE noncombustible? Please tell me the certification number.

CAN'STONE is a noncombustible material.

Under the Building Standards Act there are two categories of noncombustible material:

“Designated”: noncombustible materials designated by the Minister of Land, Infrastructure, Transport and Tourism
“Certified”: noncombustible materials granted individual certification by the Minister

CAN'STONE is made of mortar and concrete, which are “designated” noncombustible materials. The certification number we are often asked for is issued only to materials in the “certified” category.

Both are noncombustible materials as defined by the Building Standards Act and can be used in the same way.

Q7. Can it be used in cold regions?

Yes. Material for cold regions is manufactured to a frost-resistant specification and is therefore made to order. Please also avoid installing during seasons when temperatures fall below 5℃, and schedule the work for a warmer time of year.

Q8. Can it be used around a wood stove or fireplace?

Yes, anywhere the surface temperature stays at or below 200℃. Ordinary resin-based adhesives lose bond strength at those temperatures, so a mortar-based adhesive is required. For a comparison of heat resistance by adhesive type and points to watch during installation, see “Can brick tile be used on wood stove and fireplace walls? Heat resistance and installation guide”.