MT-BOND
Adhesive for Brick Tile Adhesive for brick tile, interior use（MT-BOND）
MT-BOND is a one-part, water-based adhesive made specifically for installing CAN’BRICK brick tile on interior walls. It is applied straight from the can and finishes the joint in a single operation, giving a look that stands up to a cement joint. Unlike products that are mixed with water, it raises no dust, which makes it ideal for interior work in retail spaces. Use it on interior walls that will not be exposed to water, over smooth substrates such as steel-troweled mortar, precast concrete panels, plywood, and boards.
Recommended Joint Width and Estimated Usage
Ancillary Materials
MTB-GR
MT-BOND Gray 20kg (with color powder)
- Joint Color
- Joint Finish
- Joint Pattern
Gray
Color
White
Gray
*Please note that the price differs by color.
White ¥14,800  | Gray ¥15,100 |
*For Gray, mix in the enclosed color powder before use.
●Standard coverage : approx. 5.5m²/can
●Capacity : 20kg
Other items
Sub Materials
DIY Set for CAN'BRICK (Exterior Only)
DIY Set for CAN'BRICK (Interior Only)
Jointing Mortar for Interior and Exterior Use
MT-MEJI
Jointing Mortar Bag
Grout Bag
Notched Trowel 7mm
Kushime kote
Jointer for Grapevine Joint Finishing
Grapevine Jointer
Flexible adhesive for interior and exterior tile
MT-BOND-FLEX
Adhesive for Interior and Exterior Manufactured Stone Veneer Wall Tile
ME-05
Repel S (penetrating water repellent)
REPEL・S
Glisten Coat (resin wax for interior use)
GLISTEN COAT
BRICK+AID (CAN’BRICK repair kit)
BRICK+AID
Stone Aid (CAN’STONE repair kit)
STONE+AID
Stone Concealer (touch-up compound for CAN'STONE manufactured stone veneer)
STONE Concealer
Sasara (joint finishing brush)
Sasara
Brick Chain Fall Prevention Bracket
Brick Chain
CONTACT
General Inquiries