Name: canstone Coral
Brand: CAN'ENTERPRISES
SKU: Coral
Price: 8650 JPY
Availability: InStock

CAN'STONE

CAN’STONE “Coral (COR)” is a stacked stone look manufactured stone veneer wall material modeled on the natural limestone that formed as coral and shells built up in ancient seas. It reproduces the soft color and texture born of the sea at roughly half the weight of real stone. Two colors are offered — an off-white that belongs under blue sky and sea, and a coral pink — to create a calm, restorative space with the unhurried feel of a resort.

COR-1

CAN'STONE Coral COR-1 Flat

Joint Color: White
Joint Finish: Standard Joint
Joint Pattern: Standard Joint

See the full range of 15 jointing mortar colors here

Item

Dimensions(mm)

Thickness

Quantity/case

Quantity per Box(㎡ or m)

Required Quantity(㎡ or m)

Weight/case

List Price

Flat

CFP-COR-1

W: 60~320×H: 60~320mm

25~50mm

—

0.5㎡

—

15kg

¥17,300/m² ¥8,650/case

Corner

CCP-COR-1

W: 80~130, 100~150×H: 100~285mm

25~50mm

—

2ｍ

—

12kg

¥9,000/m ¥18,000/case

Our works

Case Studies

For a seaside resort

Choose between two fresh colors that suit blue sky and sea: COR-1 off-white and COR-2 coral pink

manufactured stone veneer that recreates the character of natural stone with more presence than the real thing

CAN’STONE

CAN’STONE is a stacked stone look manufactured stone veneer wall material (a precast concrete product) for interior and exterior use. It reproduces the character of natural stone with even greater presence, at roughly 1/2 the weight of real stone. Because it is made at our own factory in Japan, supply is stable and original colors can be developed, so you can match the material to your design intent.

Precaution

Important Notes

・CAN’STONE is an interior and exterior wall material modeled on natural stone.

・When installing on an exterior wall, always fill the joints to at least 2/3 of the brick thickness. Without enough jointing mortar, water works its way behind the brick and causes it to come loose.

・For exterior walls we recommend “Repel S,” a penetrating water repellent, to help prevent staining, deterioration and efflorescence.

・Color varies from piece to piece — part of the character of natural stone — so mix pieces from several cartons as you set them.

・CAN’STONE is a cement product. Never acid wash it.

▶︎About precast concrete products

・CAN’STONE can be produced in custom colors. We can accommodate any quantity, so please contact us with your requirements.

・Because these are random shapes, cutting loss can cause some variance depending on how the material is set. Please allow for this.

----------------------------------------------

・For a Tight Joint, please order about 10–15% more.

*When we calculate a standard installation area, we assume simple setting — laying the product out like boards, with no layout planning or cut-in work. On that basis we normally ask you to order about 10–15% more than the measured area to allow for product loss.

・For a Wide Joint, please order about 5% less.

・MT-MEJI coverage (25kg bag), Standard Joint: 3.5~4.5 m² per bag

FAQ

Q1. Can CAN’STONE be used on exterior walls?

Yes, it can be used on exterior walls.

To keep it looking its best, we recommend using our ancillary product Repel S (penetrating water repellent) with it.

Q2. Is CAN’STONE imported?

No. It is made in Japan.

Every piece is made by hand by craftsmen at our own factory in Japan, so we can supply matching material if repairs are needed in the future.

Q3. I have heard that precast concrete stone tile is weaker than porcelain tile. Is that the case?

It is true that it is not as strong as porcelain tile. In recent years, however, installing with flexible adhesive has become standard practice, which compensates for that weakness, and cracking has fallen sharply.

And if a crack does appear, our STONE+AID repair compound makes the fix straightforward.

Q4. Since CAN’STONE is a cement product, is the cut edge cement gray?

No. Pigment is mixed through the mortar, so the cut edge is the same color as the face.

To cut on site, we recommend scoring a line and splitting the piece with a chisel and hammer.

Q5. Is there a risk of the product being discontinued?

No. Even if we discontinue a line for our own reasons, we can produce it again at our own factory.

You can specify it with confidence, knowing that repair material can be matched later.

Q6. Is CAN'STONE non-combustible? Could you tell us the certification number?

CAN'STONE is a non-combustible material.

Under the Building Standards Act there are two categories of non-combustible material:

“Designated”: materials designated as non-combustible by the Minister of Land, Infrastructure, Transport and Tourism
“Certified”: materials granted individual certification by the Minister

The mortar and concrete that CAN'STONE is made from fall into the “designated” category of non-combustible materials. The certification number we are often asked for is issued only to materials in the “certified” category.

Both count as non-combustible materials under the Building Standards Act and may be used in the same way.

Q7. Can it be used in cold regions?

Yes. For cold regions it is produced to a frost-resistant specification, which makes it made to order. Please also avoid installing in seasons when the temperature falls to 5℃ or below, and schedule the work for a warmer time of year.

Q8. Can it be used around wood stoves and fireplaces?

Yes, wherever the surface temperature stays at or below 200℃. Standard resin adhesives lose bond strength at those temperatures, so a mortar-based adhesive is required. For a comparison of the heat resistance of different adhesives and the points to watch during installation, see “Can brick tile be used on wood stove and fireplace walls? Heat resistance and installation guide”.