B-HRI
Slate-Look Tile Rock Island（B-HRI）
Recommended Joint Width and Estimated Usage
- Exterior Wall △
- Interior Wall ○
- Interior Floor ○
- Exterior Floor ○
- Slip Resistance R11
- Frost Resistance ○
How to Read the Icons
○ = Suitable / △ = Suitable with conditions / × = Not suitable / - = Not applicable
- Exterior Wall △ Exterior wall areas of buildings and houses (please consult us separately regarding soffits and ceilings).
- Interior Wall ○ Interior wall areas of buildings and houses (bathroom walls, kitchen backsplashes, toilet walls, shop walls and other relatively low wall areas. Please consult us separately regarding soffits and ceilings).
- Interior Floor ○ Interior floor areas that do not get wet (kitchen floors, indoor toilets, indoor shop floors and other areas walked on in shoes or slippers, where the floor is not exposed to rainwater or other moisture).
- Exterior Floor ○ Exterior floors of buildings and houses, and floors walked on in shoes that get wet or where rainwater is carried in (including interior floors such as building lobbies and house entrances). Please consult us separately regarding public exterior areas such as parks and pavements.
- Slip Resistance R11 A measure of the slip resistance of floor tiles. This site lists either the C.S.R. value or the DIN 51130 rating. Note on DIN 51130: the higher the R value, the less slippery the tile. In Europe, tiles rated R10 or higher are recommended for outdoor use.
- Frost Resistance ○ Indicates whether the tile can be used in cold regions and other environments where temperatures fall below freezing.
Unglazed / Class BI (Porcelain)
“Rock Island” is a stone-look floor tile inspired by the walkways of Capri, the island in the Bay of Naples. Elegant colorways recall the natural beauty of southern Italy, and two formats open up a range of laying patterns. The slip-resistant surface makes it a workable choice for interior and exterior floors alike.
B-HRI-1
Rock Island Beige 200 sq.
- Joint Color
- Joint Finish
- Joint Pattern
Our works
Case Studies
Precaution
Important Notes
※Color and dimensions vary from piece to piece, as is inherent to this product. Please allow a joint of about 5 mm.
FAQ
FAQ
Q1. What kind of tile is a Class BI tile?
It is a dry-pressed porcelain tile with a water absorption of 3.0% or less — very low — which gives it high water resistance.
Q2. Is maintenance difficult?
Porcelain tile has a dense surface that resists staining, so wiping with water or a neutral detergent is enough for day-to-day cleaning. No special maintenance is required.
Q3. How long is the lead time?
This product is available while stocks last. Once it is gone we cannot supply more, so please plan accordingly.
Other items
Tiles
CONTACT
General Inquiries